calc.engineer
engineer.calc/calc · 1.0.0
88 free engineering calculators: RF link budgets, LoRa/Meshtastic, PCB, solar, homelab. Keyless.
Nobody here has read this server's code, because it publishes none. The description above is the maker's own, from the registry. A connection test shows whether it answers and what tools it says it has; it never calls a tool, so it cannot show what one does with your data.
Where it sits in the directory's order
What can be seen from outside, weighed as the directory publishes.
Observable signals: 45 of 100 points (at most 60 here)
| Input | Points | What was seen |
|---|---|---|
| Source published | held at 0 | No entry here publishes source: that is what puts it in this directory. |
| Licence stated | held at 0 | With no files, there is nothing for a licence to be stated in or held against. |
| Advisory state | held at 0 | Advisory databases index packages, and these entries publish none, so there is nothing to look up. |
| Auth declared | 0 of 15 | The registry entry declares no key. That is what it declares, not a finding that it has no protection. |
| Latest connection test reached it | 20 of 20 |
Where it answers
https://calc.engineer/mcpstreamable-http
Connection test
The MCP handshake, then a request for the tool list, with no key and no data of yours. Run nightly, and by anyone, at most once every ten minutes per server.
It completed the handshake and listed 89 tools.
- Protocol
- 2025-06-18
- Calls itself
- calc-engineer 1.0.0
- Handshake time
- 873 ms
- HTTP status
- 200
The tools it lists (89, as of 34 hours ago)
The tool-description rules found nothing in these descriptions. They look for instructions aimed at a model and for hidden characters; they cannot see what a tool does when it runs.
fsplCalculate free-space path loss (FSPL) in decibels using the ITU-R P.525 standard formula. Given a frequency in MHz and distance in kilometres, returns the expected signal attenuation in an ideal line-of-sight radio link with no obstacles, reflections, or atmospheric absorption. Also computes the RF wavelength. Use this to estimate baseline path loss before adding fade margins, antenna gains, or environmental corrections. Feeds directly into link_budget for full end-to-end analysis.
link_budgetCompute a full RF link budget from transmitter power, frequency, distance, and antenna gains. Calculates EIRP, free-space path loss (ITU-R P.525), received power at the receiver, and link margin relative to an optional receiver sensitivity threshold. Use this to determine whether a wireless link closes with adequate margin. Accepts output from noise_figure_cascade and feeds into snr_margin for full receive-chain analysis.
dipoleCalculate physical dimensions of a dipole antenna for a given frequency. Returns half-wave or quarter-wave element length in metres, feet, and inches. A half-wave dipole is the most common resonant antenna with approximately 2.15 dBi gain. A quarter-wave monopole (ground plane antenna) is half the length and is widely used in handheld radios and vehicle-mounted systems. Use this before building or purchasing an antenna to verify element length for your operating frequency.
microstripCalculate PCB microstrip trace width for a target characteristic impedance using the Hammerstad-Jensen closed-form equations. Given target impedance (Z0), substrate dielectric constant (er), substrate height, and copper weight, returns the required trace width and effective dielectric constant. Optionally computes effective wavelength at a given frequency. Essential for RF PCB layout to achieve controlled impedance traces (e.g. 50 ohm for SMA connectors). References IPC-2141.
dbm_convert
How this entry becomes a listing
For the maker. The catalogue lists what it can read, and this server publishes nothing to read yet. There are two routes, and only the first is open today.
Publish the source Open today
- Put the server's source in a public repository on github.com, with a licence.
- Keep a server.json in that repository naming this server,
engineer.calc/calc, and declare the repository in it:"repository": { "url": "https://github.com/owner/repo", "source": "github" }, adding"subfolder"when the server lives in a folder. - Publish that version to the official MCP registry.
- The nightly registry sweep records the declaration. This page stays, dated, and says the source is declared but not yet read.
- The catalogue reads declared repositories at a pinned commit, in batches run by hand, and lists the servers that meet the batch's rules (among them a server.json at that commit naming the server, an https endpoint and a licence). When it lists this server, this page links to the listing. There is no schedule, so no date can be promised.
List it through the maker studio Not open yet
From the official MCP registry, last updated there 83 days ago. The registry entry · calc.engineer