NestingCalc Calculators
com.nestingcalc/calculators · 1.2.0
37 cutting and woodworking calculators: cut lists, sheet nesting, timber volume, kiln drying
Nobody here has read this server's code, because it publishes none. The description above is the maker's own, from the registry. A connection test shows whether it answers and what tools it says it has; it never calls a tool, so it cannot show what one does with your data.
Where it sits in the directory's order
What can be seen from outside, weighed as the directory publishes.
Observable signals: 45 of 100 points (at most 60 here)
| Input | Points | What was seen |
|---|---|---|
| Source published | held at 0 | No entry here publishes source: that is what puts it in this directory. |
| Licence stated | held at 0 | With no files, there is nothing for a licence to be stated in or held against. |
| Advisory state | held at 0 | Advisory databases index packages, and these entries publish none, so there is nothing to look up. |
| Auth declared | 0 of 15 | The registry entry declares no key. That is what it declares, not a finding that it has no protection. |
| Latest connection test reached it | 20 of 20 |
Where it answers
https://mcp.nestingcalc.com/mcpstreamable-http
Connection test
The MCP handshake, then a request for the tool list, with no key and no data of yours. Run nightly, and by anyone, at most once every ten minutes per server.
It completed the handshake and listed 37 tools.
- Protocol
- 2025-06-18
- Calls itself
- nestingcalc 1.2.0
- Handshake time
- 383 ms
- HTTP status
- 200
The tools it lists (37, as of 2 days ago)
The tool-description rules found nothing in these descriptions. They look for instructions aimed at a model and for hidden characters; they cannot see what a tool does when it runs.
linear_cutting_optimizerOptimize 1D cutting plans for bars, pipes and profiles (linear cutting stock problem, best-fit decreasing heuristic). Returns bars used, per-bar cut lists with positions, total waste and unplaced parts. A web_url with the plan prefilled is included for a visual SVG diagram.
sheet_cutting_optimizerOptimize 2D guillotine cutting plans for plywood, MDF, glass, sheet metal (2D nesting with kerf, per-part rotation lock for grain direction, optional sheet trim and multiple stock sizes). Returns sheets used, piece positions, utilization, estimated cut length/count and unplaced pieces. Includes a web_url with the plan prefilled for a visual layout diagram.
board_feet_calculatorCalculate board feet and lumber cost (thickness x width x length / 144 in inches). Accepts multiple boards and an optional price quoted per board foot or per MBF (thousand board feet).
miter_angle_calculatorMiter angles three ways: corner mode (any corner angle between two pieces), sides mode (regular polygon with N sides), crown mode (miter + bevel for crown molding at a spring angle).
lumber_weight_calculatorWeight of lumber by species, dimensions, quantity and moisture (dry/fresh), using species density tables. Optional custom density in kg/m3.
rebar_takeoffRebar weight takeoff (d2/162 rule): total length, weight in kg and bars per tonne for a list of rebar lines. Supports metric mm bars and US # sizes as diameters.
metal_weight_calculatorWeight of metal stock per profile: pipe/tube (OD + wall), round bar, square/rectangular tube, flat bar, angle, beam/I-beam. Materials: steel, stainless, aluminum, copper, brass.
How this entry becomes a listing
For the maker. The catalogue lists what it can read, and this server publishes nothing to read yet. There are two routes, and only the first is open today.
Publish the source Open today
- Put the server's source in a public repository on github.com, with a licence.
- Keep a server.json in that repository naming this server,
com.nestingcalc/calculators, and declare the repository in it:"repository": { "url": "https://github.com/owner/repo", "source": "github" }, adding"subfolder"when the server lives in a folder. - Publish that version to the official MCP registry.
- The nightly registry sweep records the declaration. This page stays, dated, and says the source is declared but not yet read.
- The catalogue reads declared repositories at a pinned commit, in batches run by hand, and lists the servers that meet the batch's rules (among them a server.json at that commit naming the server, an https endpoint and a licence). When it lists this server, this page links to the listing. There is no schedule, so no date can be promised.
List it through the maker studio Not open yet
From the official MCP registry, last updated there 13 days ago. The registry entry · nestingcalc.com