Dive Kit
app.divekit/mcp · 0.4.3
Experimental. Plan scuba decompression dives, gas blends and gas use with Dive Kit. Reference only.
Nobody here has read this server's code, because it publishes none. The description above is the maker's own, from the registry. A connection test shows whether it answers and what tools it says it has; it never calls a tool, so it cannot show what one does with your data.
Where it sits in the directory's order
What can be seen from outside, weighed as the directory publishes.
Observable signals: 45 of 100 points (at most 60 here)
| Input | Points | What was seen |
|---|---|---|
| Source published | held at 0 | No entry here publishes source: that is what puts it in this directory. |
| Licence stated | held at 0 | With no files, there is nothing for a licence to be stated in or held against. |
| Advisory state | held at 0 | Advisory databases index packages, and these entries publish none, so there is nothing to look up. |
| Auth declared | 0 of 15 | The registry entry declares no key. That is what it declares, not a finding that it has no protection. |
| Latest connection test reached it | 20 of 20 |
Where it answers
https://mcp.divekit.app/mcpstreamable-http
Connection test
The MCP handshake, then a request for the tool list, with no key and no data of yours. Run nightly, and by anyone, at most once every ten minutes per server.
It completed the handshake and listed 18 tools.
- Protocol
- 2025-06-18
- Calls itself
- divekit-mcp 0.4.3
- Handshake time
- 504 ms
- HTTP status
- 200
The tools it lists (18, as of 5 days ago)
The tool-description rules found nothing in these descriptions. They look for instructions aimed at a model and for hidden characters; they cannot see what a tool does when it runs.
plan_diveComputes the decompression plan for one dive, open circuit (OC) or closed-circuit rebreather (CCR): stop table, runtime, time to surface (TTS), gas used per cylinder, ascent pressure, CNS/OTU, gas density, warnings, contingencies, CCR bailout and a Dive Kit share link. Defaults unless given: GF 50/80, reserve thirds, SAC 20/15 L/min, last stop 6 m (20 ft), EN 13319 water, sea level. Use this when a diver wants a deco schedule, the gas a planned dive needs, or a what-if comparison (deeper, longer, a lost gas, other gradient factors) on air, nitrox or trimix. Not for: MOD, END or other gas facts
find_max_bottom_timeFinds the longest whole-minute bottom time on one level of an open-circuit plan: the longest that keeps every cylinder at or above its reserve (limit reserve), whose time to surface fits a budget (limit tts), or that needs no stop (limit no_deco). Use this when a diver asks how long they can stay at a depth before gas runs short, how long fits a TTS budget, or how long a level of a multi-level plan can last without stops. Not for CCR plans. For the no-stop time at one depth, check_no_deco is simpler. Takes the same fields as plan_dive, at the top level, plus the level to extend (default the d
check_no_decoUse this when the diver asks how long they can stay at a depth without decompression stops (no-deco limit, NDL, no-stop time). Returns the minutes left after the descent at GF high, the PPO₂ of the gas there and its MOD at 1.4 bar, a safety-stop reminder and a Dive Kit share link. Suits beginners and recreational divers. Not for a full dive plan (plan_dive) or a gas-limited bottom time (find_max_bottom_time). Computed by the Dive Kit app's Bühlmann ZH-L16C engine; agency tables and dive computers differ. Default gas air, GF 50/80. For "is 25 min at 30 m ok?" send bottom_time_min: the answer s
read_share_linkDecodes a Dive Kit share link (https://divekit.app/share/deco-plan/...) into the plan_dive input it carries: profile, gases, CCR rig, settings, custom contingencies, modifiers and repetitive tissue state, in the requested units. Use this when a diver pastes a Dive Kit link and wants the plan recomputed or changed. Not for links from other apps, and not a schedule: it returns inputs. Results baked into the link are ignored; plan_dive recomputes them. Links do not carry behavior.stay_on_loop or the loop oxygen-break toggle, so those return as defaults and the result says so.
How this entry becomes a listing
For the maker. The catalogue lists what it can read, and this server publishes nothing to read yet. There are two routes, and only the first is open today.
Publish the source Open today
- Put the server's source in a public repository on github.com, with a licence.
- Keep a server.json in that repository naming this server,
app.divekit/mcp, and declare the repository in it:"repository": { "url": "https://github.com/owner/repo", "source": "github" }, adding"subfolder"when the server lives in a folder. - Publish that version to the official MCP registry.
- The nightly registry sweep records the declaration. This page stays, dated, and says the source is declared but not yet read.
- The catalogue reads declared repositories at a pinned commit, in batches run by hand, and lists the servers that meet the batch's rules (among them a server.json at that commit naming the server, an https endpoint and a licence). When it lists this server, this page links to the listing. There is no schedule, so no date can be promised.
List it through the maker studio Not open yet
From the official MCP registry, last updated there 7 days ago. The registry entry · divekit.app